1.Solenoid valve hmanga siam a ni(Solenoid valve): Fluid control component a ni a, electromagnetic coil hmanga electromagnetic force siamin valve hawn leh khar a khalh thin. Industrial process control-a actuator hman tlanglawn ber pawl a ni.
2. Working pressure difference: Solenoid valve chu closed emaw open emaw a nih laiin a hmalam tawp lama inlet pressure leh a hnunglam tawp lama outlet pressure inthlauhna a kawk a ni. Electromagnetic valve principle leh structure thlan danah hian working pressure danglamna lian tham tak hi a pawimawh ber pakhat a ni.
3. Nominal pressure: National professional standard JB/ T7352-94-a factory test leh type test-a tarlan indicator zawng zawng zawm tura siam, solenoid valve-a valve body-in a tuar theih tur working pressure sang ber a kawk a ni. A tlangpuiin working pressure danglamna aiin a let 1.2 atanga 1.5 vel a ni (factory test index chu marked nominal pressure aiin a let 1.1 a ni a, sealing performance test chu nominal pressure aiin a let 1.5 a ni).
4. Electromagnetic coil: Solenoid valve khalhtu part-a component pakhat a ni a, a bik takin technical requirement angin pole magnetic field pahnih-pole siamtu special enameled wire winding hmanga siam a ni. A enameled wire hi motor dahna atana hman tlanglawn enameled wire nen a bulpui berah chuan a danglam a (pole magnetic field pahnih-a siam a, efficiency sang tak a nei a, import a ngai bawk).
5. Moving magnetic core: Solenoid valve drive part-a core component dang a ni. Synthetic metal material a ni a, benign metal element component hrang hrang special physical leh chemical processing hmanga siam a ni a, solenoid valve atana siam bik a ni a, magnetic attraction leh magnetic dissipation property tha tak a nei bawk.
6. Bistable state: Self-holding state tia hriat bawk, technology chi thar a ni a, chu chu on leh off hi stable point pahnih a ni tihna a ni. Thil chu on emaw off emaw a nih hnuah pawh chakna a hmang lo va, a pianphung (a bik takin permanent magnetic coil hmanga enkawl)-ah a awm reng a ni. Hetiang solenoid valve hi energy conservation emaw low-pressure drive emaw mamawhna hmunah hman a ni ber.
7. Normally open type: Power on laiin khar a ni a, power off laiin hawn a ni. Solenoid valve hi rei tak hawn a ngaih a, hawn chhunzawm zel hun hian khar hun aiin a tam zawk hunah hetiang chi hi thlan a tha.
8. Normally closed type: Power on laiin a hawng a, power off laiin a khar bawk. On leh off inkara inthlak fo hunah emaw, on time hian off hun a pelh loh hunah emaw he option hi thlan a tha.
9. KV value: Experimental condition bik hnuaiah, chu chu valve sir zawng zawnga pressure danglamna chu bar 1 a nih chuan, tui thianghlim 5 atanga 40 degree-a awm chu rated stroke-ah darkar khata cubic meter khatah (㎡/h) valve kal tlangin a luang chhuak a ni. Flow coefficient hi valve pakhata static characteristic indicator pakhat a ni a, a flow capacity lian tham tak a ni. KV value, CV value, leh effective cross-sectional area S hmanga tarlan theih a ni.
10. CV value: Imperial system-a flow coefficient, chu chu pressure danglamna chu square inch khatah pound 1 a nih laiin minute khata tui thianghlim 40 atanga 100 degree-a valve chhunga luang chhuak US gallon zat a ni.
11. Viscosity: Medium oil chhinchhiahna ber, chu chu dynamic viscosity (V hmanga tarlan, Poise(poise), Cp(centipoise) unit nei) leh kinematic viscosity (dynamic viscosity leh fluid density ratio, CSt (centipoise), m㎡/s unit nei) anga tarlan theih a ni. China ramah chuan kinematic viscosity hi expression atan hman a ni ber.
12. NBR: Nitrile rubber, standard elastomer hi elastic valve seat emaw sealing material emaw atan hman a ni ber. Neutral media air, tui, leh light oil te tan a tha a, fluid temperature chu Group T1 (a bik takin -18℃atanga 82℃) a awm chuan sealing material atan hman a ni.
13. PTFE: Polytetrafluoroethylene, "Plastic King" tia hriat lar tak hian chemical stability tha tak a nei a, Group T4 (<=180℃) and Group T5 (<=220℃). It is often used in valve bodies and internal components.
14. Red copper: Temperature sang -valve body tan sealing material atan hman a ni a, temperature group T6 (<=250℃), T7 (<=350℃), leh T8 (<=400℃) te a ni.
15. Fluororubber (FKM, VITON): Fluorocarbon elastomer, acid leh alkali do theihna chak tak nei, acidic leh alkaline fluid temperature group T1 (a bik takin -18℃atanga 177℃) nei tan a tha a, a bik takin carbohydrates, engine oil, gasoline, solvent, leh liquids processing atan hman a ni.
16. Fluoroplastic: Diaphragm material acidic fluid atana tha, high-temperature resistance chak lo leh tui lum emaw steam emaw atana tha lo.
17. Silicone rubber: Diaphragm sealing material a ni a, sanitary-grade ei theih tui atan a tha hle.
A chungah hian Professional Terms And Explanations Of Solenoid Valves content a awm a, a kaihhnawih hriat belh duh tan hetah hian a awmhttps://www.joosungauto.com/ ah hian a awm bawk..
